MODERN MICROCUT V20/5 Full 5-Axis Machining Center, Featuring FAGOR 8065 PC Based Control

MODERN MICROCUT V20/5 Full 5-Axis Machining Center, Featuring FAGOR 8065 PC Based Control

orCall 800-456-0964

Description

SPECIFICATIONS:


TABLE


• TABLE SIZE 320 MM DIAMETER • TABLE HEIGHT 1160 MM • TABLE LOADING CAPACITY 100 KG • TABLE TILTING A-AXIS +120 / -30 • ROTARY C-AXIS 360 DEGREES • T-SLOT (W/NO/PITCH) 12H7

TRAVEL

• X AXIS 400 MM • Y AXIS 560 MM • Z AXIS 400 MM • SPINDLE CENTER TO COLUMN 570 MM • SPINDLE NOSE TO TABLE 125 – 625 MM

SPINDLE

• SPINDLE TAPER ISO CAT-40 • MOTOR OUTPUT – DIRECT DRIVE 10 KW FAGOR •SPINDLE MAXIMUM RPM 15,000 RPM


AXES TRANSMISSION

X AXIS

• BALLSCREW Ø40 X P16; C3 • BALLSCREW LUBRICATION OIL (AUTO.) • TRANSMISSION DIRECT • SCREW FRONT BEARING D30 X D62 X 15T X 4 PCS • SCREW REAR BEARING D30 X D62 X 15T X 3 PCS • BEARINGS LUBRICATION GREASE

Y AXIS

• BALLSCREW Ø40 X P16; C3 • BALLSCREW LUBRICATION OIL (AUTO.) • TRANSMISSION DIRECT • SCREW FRONT BEARING D30 X D62 X 15T X 4 PCS • SCREW REAR BEARING D30 X D62 X 15T X 3 PCS • BEARINGS LUBRICATION GREASE

Z AXIS

• BALLSCREW Ø40 X P16; C3 • BALLSCREW LUBRICATION OIL (AUTO.) •TRANSMISSION DIRECT • SCREW FRONT BEARING D30 X D62 X 15T X 4 PCS • SCREW REAR BEARING D30 X D62 X 15T X 3 PCS • BEARINGS LUBRICATION GREASE

GUIDE WAYS

X GUIDE WAY

• X – AXIS LINEAR GUIDE TYPE 35 ROLLER • X – GUIDEWAY DISTANCE 360 MM

Y GUIDE WAY

• Y – AXIS LINEAR GUIDE TYPE 35 ROLLER • Y – GUIDEWAY DISTANCE 700 MM

Z GUIDE WAY

• Z – AXIS LINEAR GUIDE TYPE 35 ROLLER • Z – GUIDEWAY DISTANCE 400 MM

AXES FEED RATE

• X/Y/Z RAPID FEED 32 (STD.) / 42 (OPT.) • X/Y/Z CUTTING FEED 12 M/MIN

ATC:

• TOOL SHANK TYPE CAT – #40 (STD.), BT/DIN -#40, HSK63 (OPT.) • ATC TYPE ARM • NO. OF TOOLS 24 • TOOL CHANGING TIME (T-T) 2 SEC. • MAX. TOOL DIAMETER 80 MM • MAX. TOOL DIA. WITH ADJACENT POCKETS EMPTY 130 MM • MAX. TOOL LENGTH 245 MM • MAX. TOOL WEIGHT 8 KG

PNEUMATIC:

• AIR PRESSURE 6 BAR • AIR CONSUMPTION 400 L/MIN.

ACCURACY:

• POSITIONING ACCURACY +/-0.005/300 MM • REPEATABILITY 0.005 MM • A-AXIS INDEXING AND REPEATABILITY 60 SEC. • C-AXIS INDEXING AND REPEATABILITY 20 SEC.

DIMENSIONS

• LENGTH (WITH CHIP CONVEYOR) 3110 MM • WIDTH 2990 MM • HEIGHT 2960 MM • WEIGHT 5000 KG • FLOOR SPACE 3400 X 3255 MM • MAX. POWER CONSUMPTION 20 KVA

STANDARD ACCESSORIES:

• FAGOR 8065M CONTROLLER • LASER TOOL SETTER • LINEAR SCALES ON X/Y/Z AXIS • ARM TYPE ATC – 24 TOOLS • ROLLER TYPE LINEAR WAYS • SPINDLE OIL COOLER FOR 15000 RPM • SPINDLE COOLANT SYSTEM FOR 15000 RPM • COOLANT THROUGH SPINDLE SYSTEM WITH 20 BAR HIGH PRESSURE PUMP – BUILT-IN TYPE • BALL SCREW OIL COOLER FOR AXES RAPID FEED 42M/MIN • FULLY ENCLOSURE SPLASH GUARD • AUTOMATIC LUBRICATION SYSTEM • HALOGEN WORK LIGHT • TELESCOPIC WAY COVER FOR 3 AXES • TOOL KIT, LEVELING BOLTS, PADS AND NUTS • RS232 PORT / ETHERNET • PORTABLE MPG • CE DECLARATION OF CONFORMITY FOR EU COUNTRIES • CSA APPROVAL ON ELECTRICS • CHIP CONVEYOR AND BUCKET • CHIP WASH DOWN DEVICE • AIR CONDITIONER UNIT ON ELECTRICAL CABINET

EQUIPPED WITH:

• SMART MACHINE SYSTEM (WITH FANUC CONTROLLER) FOR IN-LINE SPINDLE • SPINDLE VIBRATION MONITORING & COMPENSATION SYSTEM • MECHANIC THERMAL DEFORMATION COMPENSATION & CONTROL • THE THERMAL GROWTH COMPENSATION ON SPINDLE • 20 BAR WITH SEPARATE CTS TANK • X/Y/Z 42 M RAPID FEED WITH OIL COOLANT THROUGH HOLLOW SHAFT BALLSCREW • CHIP CONVEYOR • OIL SKIMMER • 4 BAR (60 HZ) HIGH PRESSURE COOLANT PUMP FOR SPINDLE NOZZLE • COOLANT GUN • AIR CONDITIONER FOR ELECTRIC CABINET • EMC • 4TH AXIS WIRING PREPARATION RISC BOARD FOR HIGH-SPEED PROCESSING • ATA CARD 1 GIG • LASER TOOL SETTING

Specifications

ConditionNew
StockNEWMARKET