SUMMIT 19-4″ x 80″ LATHE (USED) SOLD – NO LONGER AVAILABLE

SPECIFICATIONS:

CAPACITIES

• SWING OVER BED 19”
• SWING OVER CROSS SLIDE 10 3/4″
• SWING OVER GAP 27”
• LENGTH OF GAP IN FRONT OF FACE PLATE 10 1/2″

MAXIMUM WORKPIECE WEIGHT

• AT HEAD STOCK 1,000 LBS
• BETWEEN CENTERS 4,000 LBS
• BETWEEN CENTER WITH STEADY REST 5,000 LBS

HEADSTOCK

• SPINDLE SPEEDS (#) 12
• SPINDLE SPEEDS RANGE 22-1500 RPM
• HOLE THRU SPINDLE 4 1/8”
• SPINDLE NOSE TYPE D1-8 CAMLOCK
• HEADSTOCK CENTER #5MT
• NUMBER OF BEARINGS ON SPINDLE 3
• HEADSTOCK LENGTH ON BED 21 1/4″
• TYPE OF BEARINGS ON SPINDLE 2 TAPERED ROLLER
1 STRAIGHT ROLLER
• MAIN SPINDLE ON BEARING- OUTSIDE DIA 8 1/2″
• MAIN SPINDLE ON BEARING- INSIDE DIA 5”
• OVERALL LENGTH OF SPINDLE 31 3/4″

QUICK CHANGE GEARBOX

• THREADS PER INCH (56) 3/4 – 92
• METRIC THREADS (35) .25 – 23
• MODULE THREADS (26) .25 – 11.5
• DIAMETRAL PITCH (56) 1.5 – 184
• LONGITUDINAL FEEDS (56) .0009 – .112
• CROSS FEEDS (56) .0004 – .056
• METRIC FEEDS (56) .0235 – 2.84
• LEADSCREW DIA/RANGE 1 3/8”/4 TPI
• FEED ROD DIAMETER .863”
• LUBRICATION SYSTEM OIL BATH

CARRIAGE & APRON

• CROSS SLIDE TRAVEL 13 3/4″
• CROSS SLIDE DEPTH OF BRIDGE 4 1/2″
• CROSS SLIDE WIDTH OF BRIDGE 8 5/8”
• COMPOUND REST WIDTH 5 1/2″
• LENGTH OF CARRIAGE BEARING ON WAYS 22”
• GRADUATION OF APRON HANDWHEEL .01
• TRAVEL OF CARRIAGE PER REV OF HANDWHEEL 1”
• GRADUATION OF CARRIAGE CROSS SLIDE HANDWHEEL .002”
• TRAVEL OF CROSS SLIDE PER REV OF HANDWHEEL .25”
• HEIGHT FROM TOP OF COMPOUND TO CENTERLINE OF
• LATHE 2 3/8”
• MAXIMUM TOOL HOLDER SIZE NO 6
• TYPE OF LUBRICATION SYSTEM RECIPROCATING PUMP

TAILSTOCK

• TRAVEL OF SPINDLE BARREL 8 1/2″
• DIAMETER OF SPINDLE BARREL 3”
• TAPER OF CENTER #5MT
• TAILSTOCK BODY LENGTH ON BED 13 3/8”
• LENGTH OF BARREL GRADUATIONS ON SPINDLE 8”
• TYPE OF CLAMPING ON BED BOLTS/LEVER CLAMPS
• TYPE OF LUBRICATION SYSTEM RESERVOIR

BED

• WIDTH OF BED 13 3/4″
• DEPTH OF BED 16 1/2″
• HARDNESS OF BED (ROCKWELL C) 44-52

DRIVE MOTORS

• TYPE OF INPUT DRIVE VEE BELT
• NUMBER OF VEE BELTS 3
• MAIN DRIVE MOTOR 7.5 HP
• COOLANT PUMP MOTOR 1/4 HP
MISCELLANEOUS

• STEADY REST MIN TO MAC CAPACITY 19/32”-7”
• FOLLOW REST MIN TO MAX CAPACITY 19/32”-7”
• FACE PLATE DIAMETER 23 1/2″
• COOLANT PUMP MOTOR 1/4″ HP

SHIPPING DATA

• OVERALL WIDTH 46”
• OVERALL HEIGHT 60”
• OVERALL LENGTH/WEIGHT FOR 80” CENTERS 144”/6,800 LBS

STANDARD FEATURES:

• HARDENED & GROUND INSERTED WAYS
• 15 3/8” GAP ALLOWING 27” SWING
• INCH/METRIC THREADS BY SINGLE SHIFT LEVER
• EXTENDED CROSS SLIDE WITH T-SLOTS
• CONVENIENTLY LOCATED CONTROLS
• GEARED PUMP FORCED LUBRICATION
• PRECISE THREE (3) BEARING SPINDLE
• CUTS MOST AMERICAN AND METRIC THREADS WITHOUT CHANGING GEARS