MODERN MICROCUT V20/5 Full 5-Axis Machining Center, Featuring FAGOR 8065 PC Based Control

SPECIFICATIONS:

TABLE

• TABLE SIZE 320 MM DIAMETER
• TABLE HEIGHT 1160 MM
• TABLE LOADING CAPACITY 100 KG
• TABLE TILTING A-AXIS +120 / -30
• ROTARY C-AXIS 360 DEGREES
• T-SLOT (W/NO/PITCH) 12H7

TRAVEL

• X AXIS 400 MM
• Y AXIS 560 MM
• Z AXIS 400 MM
• SPINDLE CENTER TO COLUMN 570 MM
• SPINDLE NOSE TO TABLE 125 – 625 MM

SPINDLE

• SPINDLE TAPER ISO CAT-40
• MOTOR OUTPUT – DIRECT DRIVE 10 KW FAGOR
• SPINDLE MAXIMUM RPM 15,000 RPM

AXES TRANSMISSION
X AXIS

• BALLSCREW Ø40 X P16; C3
• BALLSCREW LUBRICATION OIL (AUTO.)
• TRANSMISSION DIRECT
• SCREW FRONT BEARING D30 X D62 X 15T X 4 PCS
• SCREW REAR BEARING D30 X D62 X 15T X 3 PCS
• BEARINGS LUBRICATION GREASE

Y AXIS

• BALLSCREW Ø40 X P16; C3
• BALLSCREW LUBRICATION OIL (AUTO.)
• TRANSMISSION DIRECT
• SCREW FRONT BEARING D30 X D62 X 15T X 4 PCS
• SCREW REAR BEARING D30 X D62 X 15T X 3 PCS
• BEARINGS LUBRICATION GREASE

Z AXIS

• BALLSCREW Ø40 X P16; C3
• BALLSCREW LUBRICATION OIL (AUTO.)
• TRANSMISSION DIRECT
• SCREW FRONT BEARING D30 X D62 X 15T X 4 PCS
• SCREW REAR BEARING D30 X D62 X 15T X 3 PCS
• BEARINGS LUBRICATION GREASE

GUIDE WAYS
X GUIDE WAY

• X – AXIS LINEAR GUIDE TYPE 35 ROLLER
• X – GUIDEWAY DISTANCE 360 MM

Y GUIDE WAY

• Y – AXIS LINEAR GUIDE TYPE 35 ROLLER
• Y – GUIDEWAY DISTANCE 700 MM

Z GUIDE WAY

• Z – AXIS LINEAR GUIDE TYPE 35 ROLLER
• Z – GUIDEWAY DISTANCE 400 MM

AXES FEED RATE

• X/Y/Z RAPID FEED 32 (STD.) / 42 (OPT.)
• X/Y/Z CUTTING FEED 12 M/MIN

ATC:

• TOOL SHANK TYPE CAT – #40 (STD.), BT/DIN -#40, HSK63 (OPT.)
• ATC TYPE ARM
• NO. OF TOOLS 24
• TOOL CHANGING TIME (T-T) 2 SEC.
• MAX. TOOL DIAMETER 80 MM
• MAX. TOOL DIA. WITH ADJACENT POCKETS EMPTY 130 MM
• MAX. TOOL LENGTH 245 MM
• MAX. TOOL WEIGHT 8 KG

PNEUMATIC:

• AIR PRESSURE 6 BAR
• AIR CONSUMPTION 400 L/MIN.

ACCURACY:

• POSITIONING ACCURACY +/-0.005/300 MM
• REPEATABILITY 0.005 MM
• A-AXIS INDEXING AND REPEATABILITY 60 SEC.
• C-AXIS INDEXING AND REPEATABILITY 20 SEC.

DIMENSIONS

• LENGTH (WITH CHIP CONVEYOR) 3110 MM
• WIDTH 2990 MM
• HEIGHT 2960 MM
• WEIGHT 5000 KG
• FLOOR SPACE 3400 X 3255 MM
• MAX. POWER CONSUMPTION 20 KVA

STANDARD ACCESSORIES:

• FAGOR 8065M CONTROLLER
• LASER TOOL SETTER
• LINEAR SCALES ON X/Y/Z AXIS
• ARM TYPE ATC – 24 TOOLS
• ROLLER TYPE LINEAR WAYS
• SPINDLE OIL COOLER FOR 15000 RPM
• SPINDLE COOLANT SYSTEM FOR 15000 RPM
• COOLANT THROUGH SPINDLE SYSTEM WITH 20 BAR HIGH PRESSURE PUMP – BUILT-IN TYPE
• BALL SCREW OIL COOLER FOR AXES RAPID FEED 42M/MIN
• FULLY ENCLOSURE SPLASH GUARD
• AUTOMATIC LUBRICATION SYSTEM
• HALOGEN WORK LIGHT
• TELESCOPIC WAY COVER FOR 3 AXES
• TOOL KIT, LEVELING BOLTS, PADS AND NUTS
• RS232 PORT / ETHERNET
• PORTABLE MPG
• CE DECLARATION OF CONFORMITY FOR EU COUNTRIES
• CSA APPROVAL ON ELECTRICS
• CHIP CONVEYOR AND BUCKET
• CHIP WASH DOWN DEVICE
• AIR CONDITIONER UNIT ON ELECTRICAL CABINET

EQUIPPED WITH:

• SMART MACHINE SYSTEM (WITH FANUC CONTROLLER) FOR IN-LINE SPINDLE
• SPINDLE VIBRATION MONITORING & COMPENSATION SYSTEM
• MECHANIC THERMAL DEFORMATION COMPENSATION & CONTROL
• THE THERMAL GROWTH COMPENSATION ON SPINDLE
• 20 BAR WITH SEPARATE CTS TANK
• X/Y/Z 42 M RAPID FEED WITH OIL COOLANT THROUGH HOLLOW SHAFT BALLSCREW
• CHIP CONVEYOR
• OIL SKIMMER
• 4 BAR (60 HZ) HIGH PRESSURE COOLANT PUMP FOR SPINDLE NOZZLE
• COOLANT GUN
• AIR CONDITIONER FOR ELECTRIC CABINET
• EMC
• 4TH AXIS WIRING PREPARATION RISC BOARD FOR HIGH-SPEED PROCESSING
• ATA CARD 1 GIG
• LASER TOOL SETTING