Modern Tool Ltd.

Modern Tool Ltd.

| New Rolls

Updated September 3/08

Price quote includes: ABS - Automatic Balancing System- maintains roll parallelism of outside rolls, Additional emergency safety system, Surface hardened rolls, 2 L.E.D. Electronic Digital readouts for roll position, Hydraulic cone rolling attachment, Davi factory engineer to do machine installation and first training for customer operators at customer's site.

1 NEW DAVI MODEL MCO 3028, 3-ROLL FULLY HYDRAULIC PLATE ROLL, 10’ X ½” CAPACITY, 10’X 3/8” PREBEND, TOP ROLL DIAMETER 11.1”, SIDE ROLL DIAMETER 10.3”, WEIGHT 19,000 LBS,

PRICE………………………………U.S. .$ P.O.A. A

1 NEW DAVI MODEL MCB 3034, 4-ROLL FULLY HYDRAULIC PLATE ROLL, 10’ X ¾” CAPACITY, PREBEND 10’ X 5/8”, TOP ROLL DIAMETER 13.4”, LOWER ROLLS DIAMETER 12.6”, WEIGHT 28,900 LBS, PRICE……………………………..…U.S. $ P.O.A. A

1 NEW EAGLE MODEL TSI-H3/3 HYDRAULIC INITIAL PINCH ROLLS, 6’ X 1/8” CAPACITY, C/W CONE ROLLING, LED READOUT, INDUCTION HARDENED ROLLS,

PRICE…………………………………$ 30,500.00 E

1 NEW EAGLE MODEL CP40H UNIVERSAL SECTION BENDING ROLLS, HYDRAULIC BENDING ADJUSTMENT, 3 DRIVE ROLLS, 2-1/4” X 3/8” SOLID FLAT CAPACITY, 2” SCHEDULE 40 PIPE, 1-3/8” SOLID ROUND BAR, 1-3/8” SOLID SQUARE BAR,

PRICE………………………………….$ P.O.A. A

Modern Model X5016 Initial Pinch Hand Roll 50" X 16ga.

1 NEW MODERN MODEL X5016 INITIAL PINCH HAND ROLL 50” X 16 GA CAPACITY, HIGH CARBON TURNED AND GROUND ROLLS, OPEN END FOR EASY PART REMOVAL, (FLOOR STAND EXTRA $ 210.00)

PRICE…………………………………$ 2,900.00 C,V

Modern Model X5016E Initial Pinch Roll 50" x 16 ga.

1 NEW MODERN MODEL X5016E INITIAL PINCH ROLL, 1 HP, 1PH CSA ELECTRICS, FLOOR MODEL, 50” X 16 GA CAPACITY, 3” ROLL DIAMETER, 3 WIRE GROOVES, HIGH CARBON TURNED AND GROUND ROLLS, OPEN END FOR EASY PART ROMOVAL,

PRICE………………………………….$ 4,500.00 C,V

1 New MODERN Model R-0440H-G Hyd. Bending Roll c/w Wire Groove on Roll (3/16” x 4’) 2 HP, 3 Ph, 208 Volt, 60 Hz

Price.........................................$12,400.00 V

New MODERN Model R-0440H-G Hyd. Bending Roll w/ Wire Groove on Roll & Cone Bending Roll Attachment, 2 HP, 3 Ph, 208 Volt, 60 Hz. – Capacity: 3/16” x 4’

Price.........................................$12,900.00 V

1 NEW MODERN MODEL R-0535H HYDRAULIC BENDING ROLLS, 5’ X 10 GA. CAPACITY, HYDRAULIC POWERED PINCH ADJUSTMENT, ALL 3 ROLLS ARE HYDRAULICALLY DRIVEN, 2 HP, 208V/3/60 ELECTRICS, WEIGHT 4,290 LBS,

PRICE…………………………………$ 12,500.00 V

1 New MODERN Model R-0570H Hyd. Plate Roll 5 HP, 3 Ph, 208 Volt, 60 Hz – Serial #6130c/w Manual Backguage - Capacity 1550 mm x 7.0 mm B06-5460

price…………………………………$18,500.00 v

Modern Model R-0525 Electric Bending Roll 5' x 12 ga. $ 8,900.00 V

Pexto Model 381 Hand Slip Rolls 36" x 22 ga.

1 NEW PEXTO MODEL 381 HAND ROLLS, 36” X 22 GA CAPACITY

PRICE………………………………….$ 1,295.00 C, V

[ Home | Used Machine List ]