MODERN MICROCUT V20/5 Full 5-Axis Machining Center, Featuring FAGOR 8065 PC Based Control

Call for more Information: 403-236-1150

  • Status: New
  • Stock #: Edmonton

SPECIFICATIONS:

TABLE
 TABLE SIZE 320 MM DIAMETER
 TABLE HEIGHT 1160 MM
 TABLE LOADING CAPACITY 100 KG
 TABLE TILTING A-AXIS +120 / -30
 ROTARY C-AXIS 360 DEGREES
 T-SLOT (W/NO/PITCH) 12H7

TRAVEL
 X AXIS 400 MM
 Y AXIS 560 MM
 Z AXIS 400 MM
 SPINDLE CENTER TO COLUMN 570 MM
 SPINDLE NOSE TO TABLE 125 – 625 MM

SPINDLE
 SPINDLE TAPER ISO CAT-40
 MOTOR OUTPUT – DIRECT DRIVE 10 KW FAGOR
 SPINDLE MAXIMUM RPM 15,000 RPM

AXES TRANSMISSION
X AXIS
 BALLSCREW Ø40 X P16; C3
 BALLSCREW LUBRICATION OIL (AUTO.)
 TRANSMISSION DIRECT
 SCREW FRONT BEARING D30 X D62 X 15T X 4 PCS
 SCREW REAR BEARING D30 X D62 X 15T X 3 PCS
 BEARINGS LUBRICATION GREASE

Y AXIS
 BALLSCREW Ø40 X P16; C3
 BALLSCREW LUBRICATION OIL (AUTO.)
 TRANSMISSION DIRECT
 SCREW FRONT BEARING D30 X D62 X 15T X 4 PCS
 SCREW REAR BEARING D30 X D62 X 15T X 3 PCS
 BEARINGS LUBRICATION GREASE

Z AXIS
 BALLSCREW Ø40 X P16; C3
 BALLSCREW LUBRICATION OIL (AUTO.)
 TRANSMISSION DIRECT
 SCREW FRONT BEARING D30 X D62 X 15T X 4 PCS
 SCREW REAR BEARING D30 X D62 X 15T X 3 PCS
 BEARINGS LUBRICATION GREASE

GUIDE WAYS
X GUIDE WAY
 X – AXIS LINEAR GUIDE TYPE 35 ROLLER
 X – GUIDEWAY DISTANCE 360 MM
Y GUIDE WAY
 Y – AXIS LINEAR GUIDE TYPE 35 ROLLER
 Y – GUIDEWAY DISTANCE 700 MM

Z GUIDE WAY
 Z – AXIS LINEAR GUIDE TYPE 35 ROLLER
 Z – GUIDEWAY DISTANCE 400 MM

AXES FEED RATE
 X/Y/Z RAPID FEED 32 (STD.) / 42 (OPT.)
 X/Y/Z CUTTING FEED 12 M/MIN

ATC:
 TOOL SHANK TYPE CAT – #40 (STD.), BT/DIN -#40, HSK63 (OPT.)
 ATC TYPE ARM
 NO. OF TOOLS 24
 TOOL CHANGING TIME (T-T) 2 SEC.
 MAX. TOOL DIAMETER 80 MM
 MAX. TOOL DIA. WITH ADJACENT POCKETS EMPTY 130 MM
 MAX. TOOL LENGTH 245 MM
 MAX. TOOL WEIGHT 8 KG

PNEUMATIC:
 AIR PRESSURE 6 BAR
 AIR CONSUMPTION 400 L/MIN.

ACCURACY:
 POSITIONING ACCURACY +/-0.005/300 MM
 REPEATABILITY 0.005 MM
 A-AXIS INDEXING AND REPEATABILITY 60 SEC.
 C-AXIS INDEXING AND REPEATABILITY 20 SEC.

DIMENSIONS
 LENGTH (WITH CHIP CONVEYOR) 3110 MM
 WIDTH 2990 MM
 HEIGHT 2960 MM
 WEIGHT 5000 KG
 FLOOR SPACE 3400 X 3255 MM
 MAX. POWER CONSUMPTION 20 KVA

STANDARD ACCESSORIES:

 FAGOR 8065M CONTROLLER
 LASER TOOL SETTER
 LINEAR SCALES ON X/Y/Z AXIS
 ARM TYPE ATC – 24 TOOLS
 ROLLER TYPE LINEAR WAYS
 SPINDLE OIL COOLER FOR 15000 RPM
 SPINDLE COOLANT SYSTEM FOR 15000 RPM
 COOLANT THROUGH SPINDLE SYSTEM WITH 20 BAR HIGH PRESSURE PUMP – BUILT-IN TYPE
 BALL SCREW OIL COOLER FOR AXES RAPID FEED 42M/MIN
 FULLY ENCLOSURE SPLASH GUARD
 AUTOMATIC LUBRICATION SYSTEM
 HALOGEN WORK LIGHT
 TELESCOPIC WAY COVER FOR 3 AXES
 TOOL KIT, LEVELING BOLTS, PADS AND NUTS
 RS232 PORT / ETHERNET
 PORTABLE MPG
 CE DECLARATION OF CONFORMITY FOR EU COUNTRIES
 CSA APPROVAL ON ELECTRICS
 CHIP CONVEYOR AND BUCKET
 CHIP WASH DOWN DEVICE
 AIR CONDITIONER UNIT ON ELECTRICAL CABINET

EQUIPPED WITH:

 SMART MACHINE SYSTEM (WITH FANUC CONTROLLER) FOR IN-LINE SPINDLE
 SPINDLE VIBRATION MONITORING & COMPENSATION SYSTEM
 MECHANIC THERMAL DEFORMATION COMPENSATION & CONTROL
 THE THERMAL GROWTH COMPENSATION ON SPINDLE
 20 BAR WITH SEPARATE CTS TANK
 X/Y/Z 42 M RAPID FEED WITH OIL COOLANT THROUGH HOLLOW SHAFT BALLSCREW
 CHIP CONVEYOR
 OIL SKIMMER
 4 BAR (60 HZ) HIGH PRESSURE COOLANT PUMP FOR SPINDLE NOZZLE
 COOLANT GUN
 AIR CONDITIONER FOR ELECTRIC CABINET
 EMC
 4TH AXIS WIRING PREPARATION RISC BOARD FOR HIGH-SPEED PROCESSING
 ATA CARD 1 GIG
 LASER TOOL SETTING


Print This Email Seller