DURMA AD-S 25100 SYNCHRO PRESS BRAKE

Call for more Information: 403-236-1150

  • Status: New
  • Stock #: Newmarket, ON

SPECIFICATIONS INCH METRIC

BENDING FORCE 110 US TONS 100 METRIC TONS
BENDING LENGTH (A) 8’4” 2550 MM
DISTANCE BETWEEN COLUMNS (B) 7′ 2″ 2200 MM
TABLE WIDTH (G) 4.1” 104 MM
TABLE HEIGHT (F) 35.4” 900 MM
APPROACH SPEED 425” /MIN 180 MM/SEC
BENDING SPEED 24” /MIN 10 MM/SEC
RETURN SPEED 283” /MIN 120 MM/SEC
RAM REPEATABILITY .0004” .01 MM
BACKGAUGE TRAVEL 25.6” 650 MM
BACKGAUGE SPEED 1200” /MIN 508 MM /SEC
STROKE (C) 10.4” 265 MM
DAYLIGHT (D) 20.87” 530 MM
THROAT DEPTH (E) 16.14” 410 MM
MOTOR POWER 25 HP 11 KW
OIL TANK CAPACITY 26.5 GAL 100 LITRES
LENGTH (L) 12′ 6″ 3800 MM
WIDTH (W) 5′ 6″ 1670 MM
HEIGHT (H) 9′ 2750 MM
WEIGHT 19,580 LBS 8900 KG

STANDARD EQUIPMENT
• 4 AXES CNC: Y1, Y2, X, & R AXIS WITH BACK GAUGE.
• CONTROL UNIT – CNC MODEVA 12S 3-D CONTROL UNIT.
• UNIVERSAL WEDGE STYLE PUNCH CLAMP FOR AMERICAN OR EUROPEAN STYLE PUNCHES.
• SLIDING SHEET SUPPORT ARMS MOUNTED ON LINEAR RAIL WITH T-CANAL AND TILTING STOP.
• CNC CONTROLLED MOTORIZED CROWNING
• LARGE OPEN HEIGHT, STROKE, AND THROAT DEPTHS STANDARD.
• WORLD CLASS HYDRAULICS BLOCKS & VALVES.
• WORLD CLASS ELECTRONICS SYSTEM.
• SAFETY PLC MODULE AND INTERLOCKED GUARDING
• LASER LIGHT CURTAIN SAFETY SYSTEM
• QUICK RELEASE PUNCH CLAMPING SYSTEM
• HARDENED AND GROUND SEGMENTED 4-WAY DIE SET
• HARDENED AND GROUND SEGMENTED GOOSE NECK PUNCH SET
FEATURES

• CONTROL UNIT – CNC MODEVA 12S 3-D CONTROL UNIT
• SYNCRO Y1Y2 AXES & CNC CONTROL MOTORIZED CROWNING
INDEPENDENT LEFT AND RIGHT AXES (Y1Y2) CONTROLLED BY ELECTRONICS SERVO VALVES & ELECTRONICS LINEAR POSITION CONTROLLERS.
CNC CONTROLLED MOTORIZED CROWNING SYSTEM HOMOGENIZES BENDING FORCES EVERY POINTS OF THE BENDING PARTS TO ACQUIRE STRAIGHT BENDS. THE NEED FOR SHIMMING IS ELIMINATED.
o ANY BENDING ANGLE CAN BE MEASURED.
o VERY COMPACT, EVERYTHING IN THE APPLIANCE.
o LIGHT INFLUENCE, LIGHT OR DARK MATERIAL SURFACES PLAY PRACTICALLY NO PART AT ALL.
• SLIDING FRONT ARMS
QUICKSET SUPPORT ARMS ARE MOUNTED ON A LINEAR GUIDE WAY AND BALL BEARING SYSTEM THAT ALLOWS “FINGER TIP” LATERAL ADJUSTMENT OF THE FRONT SUPPORT ARMS. VERTICALLY ADJUSTMENT IS ALSO EASILY ACHIEVED.
• HIGH STROKE | DAYLIGHT | THROAT = HIGH WORKING SPACE
AD-S MACHINES OFFERS WIDE SPACES FOR EASE OF OPERATION ALSO REDUCES CYCLE TIMES.
• X-R BACK GAUGE
FINGERS` DEPTH AND HEIGHT IS CALCULATED BY CNC CONTROLLER AND EXECUTES HIGH SPEED SERVO MOTORS PRODUCED BY SIEMENS. RETRACTION IS ALSO A STANDARD FEATURE TO ACQUIRE ACCURATE PARTS. BACK GAUGE FINGERS ARE EASILY ADJUSTED ON LINEAR GUIDES BY BALL INTEGRATED MOTION SYSTEM.


Print This Email Seller