ACCURL IW-60S/SD HYDRAULIC IRONWORKER

INTRODUCTION:

WITH A HIGHLY DEDICATED TEAM, ACCURL MACHINE TOOLS, HAS BEEN SPECIALIZING IN THE MANUFACTURING OF HYDRAULIC IRONWORKERS, PUNCHING MACHINES, BENDING MACHINES, AND OTHER HYDRAULIC MACHINERY AND EQUIPMENT FOR OVER 30 YEARS. TOTAL CUSTOMER SATISFACTION IS OUR NUMBER ONE GOAL. WE ARE PASSIONATE ABOUT PROVIDING ENGINEERING EXCELLENCE IN EVERYTHING WE DO AND WE ARE DEDICATED TO MANUFACTURING WORLD-CLASS, HIGH-VALUE PRODUCTS FOR OUR GLOBAL CUSTOMERS.

STANDARD FEATURES:

* PIPE NOTCHING PUNCHING * ANGLE BENDING * RADIUS CORNERS PUNCHING * PIPE PUNCHING * ROUNDING OFF CORNERS * CUTTING AND ROUNDING OFF * PRESS BRAKE * BILATERIAL ROUNDING OFF ROUND BAR SHEAR * CHANNEL SHEAR SQUARE BAR SHEAR * I BEAM SHEAR ANGLE SHEAR * VEE NOTCHING NOTCHING FLAT BAR SHEAR ANGLE MITER SHEAR THE USE OF NAME-BRAND HYDRAULIC COMPONENTS ENSURES EXCELLENT RELIABILTY OF THE HYDRAULIC SYSTEM ELECTRIC CABINET WITH LOW 24 VOLT DC CONTROL CIRCUIT PROVIDES FULL PROTECTION AND SAFEY

WORK STATIONS: PUNCHING STATION: A FULL RANGE OF PUNCHES AND DIES ARE AVAILABLE FOR VARIOUS PUNCHING NEEDS QUICK CHANGE RETAINING NUT SYSTEM FOR FAST PUNCH TOOL CHANGE THOUGHTFULLY DESIGNED STRIPPER FOR VISIBILITY, SAFETY AND EASE OF USE A LARGE 2 PIECE TABE WITH SCALES AND GAUGING STOPS IS STANDARD ON ALL MODELS STRIPPER WITH INTERCHANGEABLE PLATES OF VARIOUS OPENINGS TO MINIMIZE DEFORMATION IS STANDARD ON ALL MODELS OPTIONAL HYDRAULIC STRIPPER IS AVAILABLE ON DUAL-CYLINDER IRONWORKERS AND ALL PUNCHING MACHINES

OPTIONAL TOOING: PUNCHES AND DIES ARE SOLD SEPARATELY STANDARD DUAL-OPENING DIE BLOCK FOR UP TO 50MM ROUND PUNCH AND DIE OVERHANG DIE HOLDER FOR PUNCHING CHANNEL FLANGES AND ANGLES LASER ALIGNMENT FOR MORE ACCURATE POSITIONING OF MARKED PARTS GOOSE-NECK DIE HOLDER FOR PUNCHING CHANNEL FLANGES AND WEBS URETHANE SPRING STRIPPER FOR MINIMAL DEFORMATION PIPE NOTCHER OVERSIZE PUNCH ATTACHMENT MULTI-STOP GAUGE TABLE (S/SD/KD AND PM MODELS ONLY) SINGLE VEE PRESS BRAKE MULTI VEE PRESS BRAKE LARGE VEE NOTCHER (PUNCH SIDE) ANGLE BENDING PRESS SEMI-AUTOMATIC CNC TABLES WITH 1000 x 400MM TRAVEL FLAT BAR SHEARING STATION: SPECIALLY MACHINED, UPPER BLADE TO GIVE A CLEAN SHEAR WITH MINIMUM DISTORTION LOWER BLADE HAS FOUR USABLE CUTTING EDGES VARIABLE DEGREE MITER-CUTTING ON ANGLE FLANGE SUPPORT TABLE WITH GUIDES FOR ACCURATE POSITIONING BAR SHEARING STATION ONE HOLD-DOWN FOR VARIOUS SIZES OF SQUARE BAR SHEARING AND ROUND BAR SHEARING OPTIONAL CHANNEL AND SECTION BAR SHEARING TOOLING IS AVAILABLE FOR MOST MODELS ANGLE SHEARING STATION: SINGLE SHEAR WITH NO MATERIAL LOSS AND MINIMAL DEFORMATION 45° MITER-CUTS IS EASY AND CLEAN STATIONARY BLADES WITH FOUR USABLE CUTTING EDGES SELECTABLE CORNER RADI ON MOVING BLADES FOR OPTIMUM RESULTS ON SMALL OR LARGE ANGLES OPTIONAL HYDRAULIC HOLD DOWN FOR ANGLE SHEAR

NOTCHING STATIONS:

IDEAL FOR NOTCHING OF FLAT BARS AND ANGLES ELECTRICALLY INTERLOCKED SAFETY GUARD FOR MAXIMUM SAFETY AND VISABILITY GAUGING TABLE INCLUDED WITH STOPS FOR PRECISE POSITIONING OPTIONAL VEE NOTCHER AVAILABLE THREE LIMIT SWITCHES ENABLE SETTING OF SHORT NOTCH STROKE TO IMPROVE EFFICIENCY (ON IW-50A, IW-60H AND S/SD MODELS) MAGNETIC BASE LED WORK LIGHT FOR SAFER OPERATION 1000MM ELECTRIC BACKGAUGE FOR HIGHER EFFICIENCY IN REPETITIOUS WORK, THE GAUGE EXTENSION IS AVAILABLE DEPENDING ON REQUEST

DOUBLE CYLINDER MODELS:

THE DOUBLE CYLINDER “S/SD SERIES ARE IN ACCURL TRADITION OF TWELL ENGINEERED IRONWORKERS BUILT FOR HIGH POWER, QUALITY AND RELIABILITY. THESE IRONWORKERS HAVE TWO CONTROL FOOT PEDALS, AND SEPARATE OPERATIONS CAN BE SAFELY PERFORMED SIMULTANEOUSLY. THE LOWPRESSURE SETTING FOR TOOL CHANGE PROVIDES MAXIMUM OPERTAION SAFETY. THE LONG PUNCHING CYLINDER STROKE AND DEEP THROAT ENABLE MOUNTING A WIDE RANGE OF SPECIAL EQUIPMENT. THE LARGE PUNCHING BASE WITH THE “T-SLOT MOUNTING PROVIDES A SOLID BASE FOR SECURING THE PUNCHING TOOLING, AS WELL AS A WIDE RANGE OF OPTIONAL AND CUSTOM DESIGNED TOOLING.

TECHNICAL SPECIFICATIONS:

PUNCHING PUNCHING FORCE 60 TON PUNCH CAPACITY 22 x 20 MM DIAMETER & THICKNESS 50 x 9 MM THROAT DEPTH OF S MODEL 310 MM THROAT DEPTH OF SD MODEL 510 MM MAXIMUM STROKE LENGTH 100 MM CYCLES/MIN (20MM STROKE) 30 WORKING HEIGHT UP TO DIE 1010 MM

ANGLE SHEARING AT 90° SHEARING 130 x 130 x 12 MM AT 45° SHEARING 65 x 65 x 8 MM WORKING HEIGHT 1115 MM

FLAT SHEARING FLAT BAR SHEAR 360 x 15 MM WIDTH x THICKNESS 240 x 20 MM BLADE LENGTH 360 MM ANGLE FLANGE TRIM 100 MM WORKING HEIGHT 910 MM

BAR SHEARING

ROUND BAR SHEAR 40 MM SQUARE BAR SHEAR 38 x 38 MM CHANNEL SHEAR (H x B) OPTIONAL 125 x 65 MM WORKING HEIGHT 1220 MM

NOTCHING

RECTANGULAR NOTCHER (W x D x T) 50.8 x 90 x 9 MM VEE-NOTCHER (SIDE x SIDE x T) OPTIONAL 90 x 90 x 10 MM WORKING HEIGHT 910 MM

OTHER ELECTRIC POWER 7.5 HP NET WEIGHT OF S MODEL 1,780 KGS NET WEIGHT OF SD MODEL 2,060 KGS GROSS WEIGHT OF S MODEL 1,890 KGS GROSS WEIGHT OF SD MODEL 2,230 MM MACHINE DIMENSIONS (L x W x H) S MODEL 1700x800x1710 MM MACHINE DIMENSIONS (L x W x H) SD MODEL 2070x800x1710 MM