Updated June 29/2011

1 NEW HOUGEN MODEL HMD904 MAG DRILL, 450 RPM, 7 1/16- 1 ½” HOLE CAPACITY, 2” DIAMETER DEPTH, DEAD LIFT 1680 LBS 1” PLATE

PRICE:……………………………….$ 1,650.00 V

1 NEW MODERN MODEL CH-30 BELT DRIVE FLOOR TYPE DRILL PRESS, 1-1/4” CAPACITY, MT-4 TAPER, 28-3/4” MAX SPINDLE TO TABLE, 48-3/8” SPINDLE TO BASE, 18-5/8” X 16-1/8” TABLE, 12 SPEEDS 180 – 4200 RPM,1-1/2 HP 125V/230V/3/60 ELECTRICS,

PRICE………………………………..$ 1250.00 C/E/V

1 NEW MODERN MODEL 22” XN-02 DRILL PRESS, 22” THROAT, VARIABLE SPEEDS 160 – 4500 RPM, MT-4 SPINDLE,

PRICE……………………………….$ 2,950.00 C/E/V

1 NEW MODERN MODEL DP-920P DRILL PRESS, 2 HP, MT3 TAPER, VARIABLE SPEEDS 220 – 1,500 RPM, DIGITAL TACHOMETER DISPLAY, TAPPING SYSTEM,

PRICE…………………………….$ 3,995.00 C/E

1 NEW MODERN MODEL DP-925GAD DRILL PRESS, MT #4, THROAT 20.9”, 1.5” DRILLING CAPACITY, VARIABLE SPEED VIA VFD TWO STEPS 65-540/245-2000 RPM, DIGITAL SPEED DISPLAY, C/W: POWER FEED, COOLANT SYSTEM, 220V/3PH/60HZ ELECTRICS,

PRICE………………………………$ 4,990.00 C/E/V                LEASE $ 120.00

1 NEW MODERN MODEL DP-925GAD DRILL PRESS, MT #4, THROAT 20.9”, 1.5” DRILLING CAPACITY, VARIABLE SPEED VIA VFD TWO STEPS 65-540/245-2000 RPM, DIGITAL SPEED DISPLAY, C/W: POWER FEED, COOLANT SYSTEM, 220V/1PH/60HZ ELECTRICS,

PRICE………………………………$ 4,990.00 C/E/V                LEASE $ 120.00

Modern Model Z5040  - 40mm Capacity, 3.8 hp                 

1 NEW MODERN MODEL Z5040 COLUMN DRILL PRESS, 1-1/2” CAPACITY, POWER FEED, MT 4 SPINDLE, SPEEDS 42 – 2050 RPM, 14” SPINDLE TO COLUMN, 24” MAXIMUM SPINDLE NOSE TO TABLE, 47” MAXIMUM SPINDLE NOSE TO WORK BASE, 20” X 15” TABLE, TAPPING CYCLE, 1800 LBS, C/W COOLANT SYSTEM, MOTORIZED TABLE LIFT, 220V/3/60 ELECTRICS.

PRICE ………………………………$ 7,000.00 V                      LEASE $ 158.00           

Modern Model Z5050  - 50mm Capacity, 5 hp                    

1 NEW MODERN MODEL Z5050 COLUMN DRILL PRESS, 2” CAPACITY, POWER FEED, MT4 SPINDLE, SPEEDS 48 – 1500 RPM, 14” SPINDLE TO COLUMN, 24” MAXIMUM SPINDLE TO TABLE, 20” X 15” TILTING/SWIVEL TABLE, C/W TAPPING CYCLE, COOLANT SYSTEM, 220V/3/60 ELECTRICS.

PRICE………………………………$ 7,700.00 C/E/V                                   LEASE $ 174.00

Nider Model NI-25 Geard Head Drill Press                          

1 NEW NIDER MODEL NI-25 GEARED HEAD DRILL PRESS, 1” CAPACITY IN STEEL, 5/8” TAPPING CAPACITY, QUILL TRAVEL 5.1”, TWO SPEED MOTOR 1.1/1.5 HP, 8 SPEEDS 125 – 3450 RPM, 15” X 15” TABLE, COLUMN TO SPINDLE CENTER 10”, MADE IN SWEDEN

PRICE……………………………….$ 3,875.00 C/E/V

1 NEW STEELMAX MODEL D-2 MAGNETIC BASE DRILL, C/W: STEEL CASE, DRILL CHUCK, CARRYING STRAP, SPINDLE TAPER MT#2, SPEEDS (2) 360/180 RPM, MAX MILLING CUTTER DIA. 2”, MAX TWIST DRILL CAP. 7/8”,

SLIDE STROKE 4-1/4”, TOTAL WEIGHT 37 LBS

PRICE………………………………..$ 1,895.00 C

Strands Model S25 Geared Head Drill Press - Manual Feed

1 NEW STRANDS MODEL S-25 GEARED HEAD DRILL PRESS, 1-1/4” CAPACITY IN CAST, 1” CAPACITY IN STEEL, TWO SPEED MOTOR 1.0/1.2 HP, 8 SPEEDS 120 – 3480 RPM, MT3 TAPER, 5-1/4” QUILL TRAVEL, 14” X 20” TABLE,

MADE IN SWEDEN

PRICE………………………………..$ 3,995.00 C/E/V

1 NEW UNITEC MODEL EC032A MAGNETIC BASE DRILL, 1-1/4” ANNULAR CUTTER, 8.2 AMP, 24 LBS, 600 RPM, C/W AUTO LUBRICATOR,

PRICE………………………………..$ 1,425.00 E

S